POOLSANA filter glass 0.5 – 1.0 mm 20 kg
14,52 €
Filter glass for sand filter systems. Grain size 0.5 – 1.0 mm. Weight 20 kg. This filter material made from recycled glass is an excellent alternative to conventional filter sand. Its major advantage lies in the smooth surface of the filter glass, which prevents the formation of germs and biofilms within the filter, resulting in significantly improved filtration. This leads to shorter backwashing times, longer replacement intervals (3-4 years), and reduced consumption of water treatment chemicals. For filter containers…
Related products
Oval pool PS SQ 7.00 x 3.50 x 1.50 m aluminum handrail 4D-F…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
PS3080 rectangular pool POOLSANA HQ 7.00 x 3.50 x 1.50 m…
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 35 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Rectangular pool 8.00 x 4.00 x 1.50 m PROFI set Grey Bottom…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round pool PS HQ 4.00 x 1.35 m, aluminum handrail, 0.8mm liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Set of 2 x COMPACT LED RGB pool spotlights 30 W incl. safety device…
Bring color to your pool and create impressive highlights with RGB underwater lighting. A wonderful play of colors is created beneath the water's surface, making even a refreshing dip in the evening especially enjoyable. The LED technology used is compelling not only because of its exclusive effect, but also because of its low power consumption, longevity, and efficiency. Our RGB LED pool lighting is available in one of 11 individual colors...
Steel wall oval pool POOLSANA HQ 5.25 x 3.20 x 1.50 m PLUS set
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Steel wall oval pool POOLSANA PQ 6.00 x 3.20 x 1.50 m PURE set
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 23.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Steel wall round pool PS HQ 4.50 x 1.20 m, liner 0.8 mm sand …
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 17.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...