PREMIUM 400 µm GeoBubble solar film for oval and figure-eight shapes…
191,18 €
Pool Solar Cover Made in Germany. This pool solar cover is manufactured in Germany in accordance with the highest quality standards. The welding of the film panels and the cutting to the pool shape are done by hand with dedication and attention to detail. When you purchase this pool solar cover, you receive genuine handcrafted quality. The work is carried out by skilled professionals, some of whom have decades of experience. The renowned…
Related products
MTH Air Protect UNI grey rectangular pool cover with rope
For optimal pool protection in winter, choose the inflatable AIR PROTECT cover from MTH, designed for rectangular pools. Both the top and bottom surfaces are made of woven-reinforced PVC, each weighing 580 g/m². When inflated, this double-layered cover forms a uniform dome over the pool, providing excellent protection. Rainwater, dirt, and even snow are prevented from entering your pool. A valve inlet adapter (diameter...) is included.
PS30 rectangular pool PS 6.00 x 3.00 x 1.50 m 4D film 0.9 …
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 25 m³, number of insulating formwork blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Sand filter system POOLSANA Plus 500Pump 100
Heavy-duty and pressure-resistant filter tank Made in Germany. The sand filter tank with a diameter of 500 mm is made of polypropylene and is particularly impressive due to its high-quality workmanship and high pressure resistance of up to 1.5 bar. In combination with the self-priming, plug-and-play pool pump, which has a circulation capacity of approximately 8 m³/h at 6 mWs, 550 watts, 230 V, the system is very well suited for swimming pools up to approximately 50 m³. Filling capacity...
Single pool steel wall oval pool POOLSANA HQ 7.00 x 3.50 x…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Single pool steel wall round pool POOLSANA PQ 4.50 x 1.50 m
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 22 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Single round pool PS SQ 5.00 x 1.25 m with aluminum wall…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 22.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Steel wall round pool POOLSANA HQ 4.00 x 1.35 m PLUS set…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Steel-walled figure-eight pool PS HQ 5.25 x 3.20 x 1.35 m liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one base plate, is installed.