PREMIUM 500 my GeoBubble SolGuard solar film for rectangular surfaces…
285,56 €
Pool Solar Cover Made in Germany. This pool solar cover is manufactured in Germany in accordance with the highest quality standards. The welding of the film panels and the cutting to the pool shape are done by hand with dedication and attention to detail. When you purchase this pool solar cover, you receive genuine handcrafted quality. The work is carried out by skilled professionals, some of whom have decades of experience. The renowned…
Related products
Bypass valve for pool heat pumps
This bypass valve is ideal for connecting smaller heat pumps to freestanding swimming pools with hose piping. The three shut-off valves allow precise regulation of the flow rate through the heat pump, ensuring optimal efficiency depending on the weather. It accepts 32 mm or 38 mm plastic hose connections.
Oval pool PS SQ 5.25 x 3.20 x 1.50 m aluminum handrail 4D-F…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
PoolSANA PLUS built-in skimmer with flange cover + inlet…
The skimmer, also called a surface skimmer, is a built-in swimming pool component that connects to the sand filter system or pool pump and draws water from the pool's surface. Our built-in skimmer PLUS is ideal for steel-walled pools, above-ground pools of all types, including round, figure-eight, and oval pools, and is very easy to install. The skimmer is made of impact- and pressure-resistant ABS plastic and has a 1 ½" female threaded connection. A 1 ½" male threaded fitting x 3238...
PS30 rectangular pool POOLSANA 8.00 x 4.00 x 1.50 m 4D foil…
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 45.5 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted...
PS30 rectangular pool POOLSANA HQ 6.00 x 3.00 x 1.50 m foil…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 25 m³, number of insulating formwork blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Single round pool PS HQ 4.00 x 1.50 m with aluminum wall…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Single steel-walled figure-eight pool POOLSANA HQ 6.25 x 3,…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 22.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
SPECK Pool Pump SuperPro 11
High-quality premium pool pump SPECK pumps. For over 100 years, the name SPECK has stood like no other for quality filter pumps made in Germany. The SPECK BADU SuperPro is a monobloc pump with an integrated strainer. A bellows mechanical seal is mounted on the plastic impeller hub. The motor/pump shaft does not come into contact with the circulating water, thus ensuring separation of live and water-carrying parts. The SuperPro series...