PREMIUM PE pool cover for oval and figure-eight pools
31,46 €
Pool covers protect pool water from natural contaminants and significantly reduce the frequency of pool cleaning. This particularly tear-resistant cover is made of coated PE woven fabric with eyelets and a tensioning rope with a ratchet. The pool cover prevents algae growth due to its opacity and is suitable for all seasons. The top side of the pool cover is blue, while the underside is coated black. The above size selection refers to…
SKU:
211007
Category: New products
Description
Coated PE woven fabric with eyelets and tensioning cord with ratchet. Quality approx. 160-180 g/m².
Additional information
| Weight | 3,4 kg |
|---|
Related products
Oval pool PS SQ 8.00 x 4.00 x 1.50 m aluminum handrail 4D-F…
4,84 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Rectangular pool 7.00 x 3.50 x 1.50 m PROFI set high level …
9,68 €
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 35 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Rectangular pool 8.00 x 4.00 x 1.50 m PROFI set Sand Bottom…
9,68 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round pool Alu PS SQ 3.00 x 1.25 m Alu handrail 0.9 mm …
2,42 €
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 8 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size.
Single pool, steel wall round pool POOLSANA HQ 4.50 x 1.35 m
1 737,56 €
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Single pool, steel wall round pool POOLSANA HQ 5.00 x 1.35 m
1 936,00 €
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 24.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single steel-walled round pool PS HQ 5.00 x 1.35 m Fol…
1 950,52 €
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 24.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Stainless steel professional pool ladder, wide-reaching, 3-step AST…
271,04 €
High-gloss polished, wide-set swimming pool ladder made of V2A stainless steel. The stiles have a diameter of 43 mm and feature three sturdy and secure stainless steel steps, each with two elegant black, non-slip plastic treads. The steps come with a protective film that must be removed before installation. On the inside of the pool, the stiles are fitted with plastic buffers to support the ladder against the pool wall without chafing the liner.
