PREMIUM underlay fleece, pack III 28m², quality 500 g/m²
108,90 €
Very strong, thermally and mechanically bonded, rot-proof underlay fleece for protecting the pool liner from PVC-incompatible materials, min. 500 g/m². Recommended for the following swimming pools from our range: Round pool 5.00 m, Oval pool 5.70 x 3.00 m, Oval pool 6.00 x 3.20 m, Oval pool 7.00 x 3.50 m, Oval pool 5.50 x 3.70 m, Oval pool 6.10 x 3.75 m, Figure-eight pool 6.25 x 3.60 m. The fleece is supplied in rolls 2 m wide and 14 m long. Due to manufacturing and packaging technology…
Related products
MTH Air Protect Bicolor pool cover for round pools, color…
For optimal pool protection in winter, choose the inflatable AIR PROTECT cover from MTH, designed for round pools. Both the top and bottom surfaces are made of woven-reinforced PVC, each weighing 580 g/m². When inflated, this double-layered cover forms a uniform dome over the pool, providing excellent protection. Rainwater, dirt, and even snow are prevented from entering your pool. A valve inlet adapter (20 mm diameter) is included.
Oval pool POOLSANA HQ 7.00 x 3.50 x 1.50 m with aluminum handrail…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Pool heat pump POOLSANA InverPRESTIGE 15
1. High Energy Efficiency: Thanks to full inverter technology combined with sophisticated design and control, our InverPRESTIGE heat pumps have a particularly high coefficient of performance (COP). Specifically, this means that the heat pumps deliver many times the heating output they themselves draw from the grid. Our InverPRESTIGE series also scores highly in terms of appearance. The heat pump housing is made of metal with a black protective coating...
Pool liner 0.8 mm for round pools, grey
Pool Liner Made in Germany: This pool liner is manufactured in Germany in compliance with the highest quality standards. From the production of the raw material into liner sheets to the finishing and welding together to create a complete pool lining, this pool liner guarantees you exclusively quality Made in Germany. The work is carried out by skilled professionals, some of whom have decades of experience. As a testament to our own conviction...
PS PREMIUM 500 sand filter system with Speck PS SuperP pump…
Maximum convenience thanks to the two-part tank design. The centrally divided design makes filling and changing the sand particularly easy, making the system ideal for installation in confined spaces such as basements or filter shafts. The two tank halves are connected by a stainless steel clamping ring, which is finished with a visually appealing black protective coating. The tank is made of GRP (glass-reinforced plastic)...
Round pool PS HQ 4.00 x 1.50 m, aluminum handrail, 0.8mm liner…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Steel-walled round pool PS HQ 3.00 x 1.20 m, liner 0.8 mm sand …
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 7.5 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or other factors.
Steel-walled round pool PS HQ 4.50 x 1.35 m, liner 0.8 mm sand …
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...