Protective fleece for rectangular pool, white
234,74 €
Non-rotting, fungicide-treated underlay fleece to protect the pool liner from PVC-incompatible materials. The fleece is supplied in rolls 1.50 m wide. It is spot-fixed to the pool walls using spray adhesive. Matching products are available. Scope of delivery: Rectangular pool 6.00 x 3.00 x 1.50 m: 30 linear meters at 1.50 m roll width, 45 m²; Rectangular pool 7.00 x 3.50 x 1.50 m: 40 linear meters at 1.50 m roll width, 60 m²; Rectangular pool 8.00 x 4.00 x 1.50 m: 5…
Related products
Aluminum wall oval pool PS HQ 5.25 x 3.20 x 1.50 m with aluminum handle…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Flange set of ladder end pieces for ASTRALPOOL ladders
Flange set of ladder end pieces for ASTRALPOOL ladders. Made of V4A stainless steel, these ladder end pieces are mounted to a solid surface and serve as receptacles for the ladder stiles, which simply need to be attached. This eliminates the need for cementing in mounting sleeves. The set includes two ladder end pieces with gaskets, anchors, and screws. Dimensions in mm.
Round pool PS SQ 5.00 x 1.50 m, aluminum handrail, 1.0 mm liner…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 27.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Steel wall oval pool PS HQ 6.00 x 3.20 x 1.20 m foil 0.8…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 18.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Steel wall round pool POOLSANA HQ 4.50 x 1.35 m PLUS set…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel wall round pool POOLSANA HQ with aluminum handrail 3.50 x 1,…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 10.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Steel-walled round pool with iron mica coating, aluminum handrail, and foil…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 22.5 m³. General information on steel-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required, regardless of the pool size...