PS30 rectangular pool POOLSANA 5.00 x 3.00 x 1.50 m 4D foil... - Image 1
Click to enlarge
Home » Shop » PS30 rectangular pool POOLSANA 5.00 x 3.00 x 1.50 m 4D foil…

PS30 rectangular pool POOLSANA 5.00 x 3.00 x 1.50 m 4D foil…

4,84 €

Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 21.5 m³, number of insulating blocks: 85 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted.

SKU: 107247 Category:
Description

POOL SANA rectangular pool consisting of PS30 insulating shell elements + a precisely fitting, German-made 0.9 mm thick embossed 4D PVC pool liner in blue with wedge bead + aluminum hanging profiles. As a PROFI High Level set, including a POOL SANA 75 W UV-C disinfection unit (significantly reduces water maintenance requirements), rot-proof protective fleece + spray adhesive, wide-mouth Slim built-in skimmer for an extra-high water level + bottom drain + 2 inlet nozzles with wall penetrations, sand filter…

Additional information
Weight141,78 kg

Related products

Pool finger brush

0,00 €
Affordable brush for manually cleaning pool liners. This extra-large pool hand brush with a non-slip handle is an essential tool for spring cleaning your pool. Equipped with strong and durable bristles, this brush effectively removes even stubborn dirt.
Add to cart

Round aluminum pool PS SQ 3.50 x 1.25 m, aluminum handrail 1.0 mm …

2,42 €
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 11 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required regardless of the pool size...
Add to cart

Round pool Alu PS SQ 5.00 x 1.50 m Alu handrail 0.9 mm …

4,84 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 27.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Add to cart

Single pool steel wall oval pool POOLSANA HQ 7.00 x 3.50 x…

2 207,04 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Add to cart

Single round pool PS HQ 4.00 x 1.25 m with aluminum wall…

2,42 €
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 14.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Add to cart

Single steel-walled round pool PS SQ 5.00 x 1.50 m with A…

2,42 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 27.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Add to cart

Steel wall oval pool POOLSANA HQ 7.00 x 3.50 x 1.50 m PROFI…

2,42 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Add to cart

Steel wall oval pool POOLSANA HQ with aluminum handrail 6.00 x 3,…

2,42 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 23.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Add to cart