PURE stainless steel pool ladder, narrow/wide 4 steps
283,14 €
narrow-profile swimming pool ladder made of V2A stainless steel with a 43 mm diameter stiles, offering excellent value for money. On the inside of the pool, the stiles are fitted with plastic buffers that support the ladder against the pool wall without chafing the liner. On the outside of the pool, the ladder is secured using plastic mounting sleeves that are cemented flush with the ground and serve as anchor points for the ladder stiles. Alternative…
Related products
Pool cover MTH Air Protect UNI gray oval-eight shape …
For optimal pool protection in winter, choose the inflatable AIR PROTECT PROFI cover for oval and figure-eight pools. Both the top and bottom surfaces are made of fabric-reinforced PVC, each weighing 580 g/m². When inflated, this double-layered cover forms a uniform dome over the pool. This provides optimal protection, preventing rainwater, dirt, and even snow from entering your pool. A valve inlet adapter with a 20 mm diameter nozzle is included.
PS3080–Rectangular pool POOLSANA HQ 7.00 x 3.50 x 1.50 m …
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 35 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round pool PS SQ 4.50 x 1.35 m aluminum HL 4D foil 0.9 mm…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Single pool steel wall round pool POOLSANA PQ 3.50 x 1.50 m
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 13.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single round pool PS SQ 3.00 x 1.25 m with aluminum wall…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 8 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size.
Steel-walled figure-eight pool PS HQ 4.70 x 3.00 x 1.35 m liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 17.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
Steel-walled figure-eight pool PS HQ 5.25 x 3.20 x 1.35 m liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one base plate, is installed.