PVC combination handrail for figure-eight pools 4.70 x 3.00 m, color…
111,32 €
The combination handrail features a groove on the side for securing the liner and is suitable for both pool liners with a hanging bead and those with a wedge bead. In the first case, the bead welded to the liner is hooked over the steel wall, and then the handrail is attached. When replacing the liner, the old pool liner is cut along the handrail, and the new liner, which also has a wedge bead, is then installed using the handrail.
SKU:
271576
Category: New products
Description
Combination handrail made of grey PVC with a side groove for easy foil replacement. Profile approx. 38 x 38 mm.
Additional information
| Weight | 7 kg |
|---|
Related products
Flange set of ladder end pieces for ASTRALPOOL ladders
87,12 €
Flange set of ladder end pieces for ASTRALPOOL ladders. Made of V4A stainless steel, these ladder end pieces are mounted to a solid surface and serve as receptacles for the ladder stiles, which simply need to be attached. This eliminates the need for cementing in mounting sleeves. The set includes two ladder end pieces with gaskets, anchors, and screws. Dimensions in mm.
Metal plate for POOLSANA magnetic spotlights at Frame-P…
0,00 €
MTH Air Protect UNI grey round pool cover with rope
469,48 €
For optimal pool protection in winter, choose the inflatable AIR PROTECT PROFI cover for round pools. Both the top and bottom surfaces are made of reinforced PVC fabric, weighing 580 g/m² per side. When inflated, this double-layered cover forms a uniform dome over the pool. This provides optimal protection, preventing rainwater, dirt, and even snow from entering your pool. A valve inlet adapter with a 20 mm diameter connection is included...
Oval pool PS SQ 8.00 x 4.00 x 1.50 m aluminum handrail 4D-F…
4,84 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
PS3080 rectangular pool POOLSANA HQ 8.00 x 4.00 x 1.50 m…
7,26 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Single pool, steel wall round pool POOLSANA HQ 4.50 x 1.35 m…
2 071,52 €
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel wall oval pool PS HQ 4.90 x 3.00 x 1.20 m foil 0.8…
2 393,38 €
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 14 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Steel wall round pool POOLSANA HQ 3.50 x 1.35 m PLUS set…
2 337,72 €
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 12 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
