Sand filter system Pro Prime 500 Power SPECK ProPump 11
842,16 €
Heavy-duty and pressure-resistant filter tank Made in Germany. The sand filter tank with a diameter of 500 mm is made of polypropylene and impresses above all with its high-quality workmanship and high pressure resistance of up to 1.5 bar. In combination with the self-priming, plug-and-play pool pump, which has a circulation capacity of approximately 13 m³/h at 6 mWs, 690 watts, 230 V, the system is very well suited for swimming pools up to approximately 65 m³. Filling capacity…
Description
Pressure-resistant, thick-walled polypropylene filter tank Ø 500 mm Made in Germany 7-way backwash valve Original self-priming SPECK pump POOLSANA ProPump 11 with pre-filter incl. mounted connection cable with mains plug Made in Germany Filter capacity 13 m³/h at 690 watts 230 V TÜV and GS tested Recommended for pools up to approx. 65 m³
Additional information
| Weight | 18 kg |
|---|
Related products
Aluminum wall oval pool PS SQ 8.00 x 4.00 x 1.50 m with aluminum handrail…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the pool...
Pool liner 0.8 mm for round pools, sand
Pool Liner Made in Germany: This pool liner is manufactured in Germany in compliance with the highest quality standards. From the production of the raw material into liner sheets to the finishing and welding together to create a complete pool lining, this pool liner guarantees you exclusively quality Made in Germany. The work is carried out by skilled professionals, some of whom have decades of experience. As a testament to our own conviction...
PoolSANA PLUS built-in skimmer with flange cover + inlet…
The skimmer, also called a surface skimmer, is a built-in swimming pool component that connects to the sand filter system or pool pump and draws water from the pool's surface. Our built-in skimmer PLUS is ideal for steel-walled pools, above-ground pools of all types, including round, figure-eight, and oval pools, and is very easy to install. The skimmer is made of impact- and pressure-resistant ABS plastic and has a 1 ½" female threaded connection. A 1 ½" male threaded fitting x 3238...
Round pool PS SQ 3.50 x 1.20 m, aluminum handrail, 1.0 mm liner…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 10.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Round pool PS SQ 4.00×1.35m, aluminum handrail, 4D liner 0.9 m…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single pool, steel wall round pool POOLSANA HQ 4.00 x 1.35 m…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single steel-walled round pool PS SQ 4.50 x 1.50 m with A…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 22 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel wall oval pool PS SQ 8.00 x 4.00 x 1.50 m with aluminum…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...