Single pool steel wall oval pool PS HQ 4.90 x 3.00 x 1.50 …
1 660,12 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection…
Description
Steel wall oval pool POOL SANA HQ – Made in Germany – consisting of approx. 0.8 mm thick, hot-dip galvanized steel wall + very precisely fitting, sand-colored PVC pool liner 0.8 mm with hanging bead + combination special handrail and base rails in grey.
Additional information
| Weight | 183,5 kg |
|---|
Related products
1-piece set of POOLSANA PROFI pool spotlights with LED bulb…
PAR56 Recessed Underwater Spotlight with 20W White LED Bulb. High-quality underwater spotlight made of impact- and pressure-resistant ABS for installation in straight pool walls, rectangular pools, and the straight sides of oval pools. The spotlight is equipped with a modern, energy-efficient LED bulb with a 316LV4A stainless steel backplate, which produces a very bright light of approximately 2,000 lumens at a maximum power consumption of 20W. For oval or rectangular pools, the underwater spotlight...
Pool liner 0.8 mm for oval pools, blue
Pool Liner Made in Germany: This pool liner is manufactured in Germany in compliance with the highest quality standards. From the production of the raw material into liner sheets to the finishing and welding together to create a complete pool lining, this pool liner guarantees you exclusively quality Made in Germany. The work is carried out by skilled professionals, some of whom have decades of experience. As a testament to our own conviction...
PS3080 rectangular pool 6.00 x 3.00 x 1.50 m PLUS set grey…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 25 m³, number of insulating formwork blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round pool PS SQ 4.50 x 1.35 m, aluminum handrail, 4D liner 0,…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Set of 1 x COMPACT LED pool spotlight, white, 40 W, including safety device…
Create stunning accents and make your pool a real eye-catcher, even in the evening, with beautiful underwater lighting. Our flat LED pool lights bathe the water's surface in a pleasant light, creating a relaxing atmosphere by the pool. Equipped with a small recessed niche, this light is particularly well-suited for installation in curved steel walls, so you don't have to forgo beautiful lighting even with a round pool. Another...
Single steel-walled figure-eight pool POOLSANA HQ 4.70 x 3,…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 15.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
Steel wall oval pool POOLSANA HQ with aluminum handrail 8.00 x 4,…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Steel-walled round pool PS HQ 3.00 x 1.20 m, liner 0.8 mm sand …
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 7.5 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or other factors.