Single round pool PS HQ 5.00 x 1.50 m with aluminum wall…
2,42 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 27.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Description
Round pool POOL SANA HQ – Made in Germany – consisting of a 1 mm thick aluminum wall in silver-grey/white aluminum + very precisely fitting, grey PVC pool liner 0.8 mm with hanging bead + combination special handrail made of high-quality and stable aluminum and bottom rails made of plastic.
Additional information
| Weight | 264,5 kg |
|---|
Related products
Aluminum wall round pool PS HQ with aluminum handrail 4.00 x 1.50 m PLU…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Complete set of POOLSANA combination special handrail for Value-…
The combination handrail features a groove on the side for securing the liner and is suitable for both pool liners with a hanging bead and those with a wedge bead. In the first case, the bead welded to the liner is hooked over the steel wall, and then the handrail is attached. When replacing the liner, the old pool liner is cut along the handrail, and the new liner, which also has a wedge bead, is then installed using the handrail.
Pool heat pump connection set Ø 50 mm
Connection kit for integrating the heat pump into the existing filter circuit via a bypass line with a pipe cross-section of 50 mm. Thanks to the ball valves included in the kit, the water pressure can be adjusted at any time to the changing outside temperature. The adhesive and cleaner are formulated to be suitable and sufficient for the bonding areas. Consisting of: 1 x roll of SpaFlex hose (12 m), 3 x 2-way ball valves (50 mm), 2 x T-pieces (50 mm), 2 x elbows (50 mm, 90°), 1 x PVC re-cable...
PS30 rectangular pool POOLSANA HQ 7.00 x 3.50 x 1.50 m foil…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 34.5 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted...
PS30 rectangular pool POOLSANA SQ 6.00 x 3.00 x 1.50 m foil…
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 25.5 m³, number of insulating blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted.
PS3080 rectangular pool 7.00 x 3.50 x 1.50 m PROFI set Sanitary ware…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 34.5 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted...
Round pool, aluminum PS HQ, 4.50 x 1.25 m, aluminum handrail 0.8 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 18 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required regardless of the pool size...
Single oval pool PS SQ 7.00 x 3.50 x 1.50 m aluminum…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...