Single steel-walled figure-eight pool POOLSANA HQ 6.25 x 3,…
2,42 €
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 25.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one…
Description
Steel wall figure-eight pool POOL SANA HQ – Made in Germany – consisting of 0.7 mm thick, hot-dip galvanized steel wall + steel support structure with 2 seating edges + very precisely fitting, blue PVC pool liner 0.8 mm with hanging bead + combination special handrail made of high-quality and stable aluminum as well as bottom rails made of plastic.
Additional information
| Weight | 182 kg |
|---|
Related products
Aluminum wall oval pool PS HQ 8.00 x 4.00 x 1.50 m aluminum hand…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the pool...
Aluminum wall oval pool PS SQ 8.00 x 4.00 x 1.50 m with aluminum handrail…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the pool...
Oval pool PS SQ 7.00 x 3.50 x 1.50 m aluminum handrail 4D-F…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
PS30 rectangular pool POOLSANA SQ 7.00 x 3.50 x 1.50 m foil…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 34.5 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted...
Round pool PS SQ 3.50×1.35m aluminum handrail 4D foil 0.9 m…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 12 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Single pool steel wall oval pool POOLSANA HQ 5.25 x 3.20 x…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Single pool, steel wall round pool PS HQ 4.50 x 1.20 m Fol…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 17.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single steel-walled figure-eight pool POOLSANA HQ 5.25 x 3,…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 17.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed either freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...