SPECK pool pump POOLSANA ProPump 7
326,70 €
Self-priming, reliable, and exceptionally quiet SPECK brand pool pump. For over 100 years, the name SPECK has stood for quality filter pumps made in Germany like no other. The SPECK ProPump is a monobloc pump with an integrated strainer. A bellows mechanical seal is mounted on the plastic impeller hub. The motor/pump shaft does not come into contact with the circulating water, thus ensuring separation of live and water-carrying components.
Description
Original SPECK pool pump, made in Germany, TÜV and GS certified. Powerful and self-priming. Circulation capacity 7 m³/h at 6 mWs. Water connection 3238 mm or 50 mm. Fittings included. Power consumption 450 watts, 230 V, 1 N. Includes power cable with plug.
Additional information
| Weight | 7,45 kg |
|---|
Related products
Cuttable stainless steel pool ladder COMFORT 4-step for mounting…
Very stable ASTRALPOOL swimming pool ladder with ladder stiles made of highly polished V2A stainless steel with a stile diameter of 43 mm. The pool ladder has four non-slip plastic steps on each side and a central ladder platform and is suitable for above-ground pools up to 1.20 m deep. If the swimming pool is partially sunk into the ground, the ladder stiles located on the outside of the pool can easily be shortened accordingly with a hacksaw, possibly removing some steps.
PS30 rectangular pool POOLSANA 8.00 x 4.00 x 1.50 m 4D foil…
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 45.5 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted...
Rectangular pool 7.00 x 3.50 x 1.50 m PROFI set high level …
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 35 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round pool Alu PS SQ 3.00 x 1.25 m Alu handrail 0.9 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 8 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size.
Round pool PS SQ 4.50 x 1.50 m, aluminum handrail, 1.0 mm liner…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 22 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Single pool steel wall round pool POOLSANA PQ 3.50 x 1.35 m
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 12 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel-walled figure-eight pool PS HQ 4.70 x 3.00 x 1.35 m with aluminum…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 17.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
Steel-walled round pool PS HQ 3.50 x 1.20 m, 0.8 mm sand-colored liner…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 10.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...