Azuro pH minus 0,7 kg
2,42 €
In stock
Granular preparation for reducing the pH value of the water in the hot tub.
It is used to reduce the pH value in the whirlpool. Bathing water should have a pH value between 7.0 and 7.4. In this range, the most effective action of chlorine and chlorine-free products is guaranteed without side effects.
Dosage: To reduce the pH value by 0.2, add approx. 15 g of the product to 1 m3 of water (1,000 l) (a higher dose is usually required for hard water). The calculated amount of product is thoroughly dissolved in water in a plastic bucket and slowly poured into the hot tub with the filter device turned on. Measurement of the pH value (with a suitable tester) must be carried out after the water has been thoroughly mixed. The procedure is repeated until the pH value is in the desired range of 7.0 – 7.4.
| Weight | 0,7 kg |
|---|---|
| Dimensions | 0,1 × 0,1 × 0,1 cm |
