Home waterworks MTF WPE120GB
203,28 €
The MTF WPE120GB garden water pump is primarily used for pumping clean utility water – for example, to irrigation systems, filling pools, flushing toilets, or other common water supply tasks around the house. With a power input of 1,200 W, it delivers water to a height of 46 meters, with a maximum flow rate of 3,500 liters per hour. The suction lift of 7 meters is sufficient for efficient water pumping from typical household sources.
In stock
The pump is equipped with a traditional pressure switch and a 19 liter horizontal pressure tank with a replaceable membrane that maintains steady pressure and minimizes pump cycling. The tank is made of durable stainless steel.
At the heart of the unit is a single-stage centrifugal self-priming pump with a stainless steel body and plastic hydraulic components reinforced with fiberglass. The pump shaft is stainless steel. The motor is wound with copper wire, air-cooled, and equipped with thermal overload protection. The entire unit is stably mounted on solid legs with floor anchoring holes.
All automatic domestic water systems in the MTF series are equipped with safety features such as a thermal fuse to prevent overheating.
Related products
Garden Pump MTF WPE060G
This pump will be appreciated by most users, as its performance can handle the work in any garden. It can be used for watering, but also for filling and draining swimming pools.
The pump is equipped with a so-called "dry" electric motor, which is cooled by air during operation. Among other things, this model is equipped with a thermal fuse that protects it from overheating and the motor has a copper winding.
Garden Pump MTF WPE080G
The WEP080G pump is equipped with an air-cooled electric motor, a big plus is the inlet pre-filter, which is used to capture coarser dirt and thus significantly extends the life of the pump. Another advantage is the copper winding of the motor and the pump is also equipped with a thermal fuse to prevent overheating.
This model is intended for all occasions when it is necessary to pump any water without admixture of abrasive particles.
Home waterworks MTF WPE080GB
The MTF WPE080GB garden water pump is designed primarily for pumping clean utility water – for example, for irrigation systems, filling pools, flushing toilets, or other common water supply tasks around the house. With a power input of 800 W, it delivers water up to a height of 40 meters, with a maximum flow rate of 3,200 liters per hour. The suction height of 7 meters ensures efficient water pumping from typical household sources.
Sludge Pump MTF WPE055D
It is a model of a pump for polluted and sludge water, which can also deal with particles contained in the water, up to a diameter of 35 mm, which makes it suitable for pumping water, for example, from ponds where leaves or grass may be attacked. The pump has a stainless steel casing, which, in conjunction with the copper winding and protection against overheating, predisposes it to a long service life.
Submersible Pressure Pump MTF WPE110P
MTF WPE110P is a submersible pressure pump with a power input of 1,100 W, designed for pumping clean or slightly contaminated water up to 35 °C. Thanks to its powerful multi-stage motor, it is an ideal tool for efficient water extraction from tanks, pools, wells, barrels, or flooded areas such as basements. With a maximum head of up to 35 meters and a flow rate of 5,500 l/h, it can handle water pumping from depths of up to 7 meters.
Submersible Pressure Pump MTF WPE110PA
MTF WPE100PA is a domestic water automatic pump with an integrated electronic control unit, which includes a pressure switch and a flow sensor. This automatic pressure system is an ideal solution for homes and gardens, providing efficient water supply. With a power input of 1,000 W and a flow rate of up to 6,000 l/h, it efficiently pumps water from wells, pools, shafts, tanks, or boreholes with a diameter from 150 mm, as well as operating irrigation systems.
Submersible Pump MTF WPE020
It is a basic type of light submersible pump for clean and utility water.
The motor of this model has a copper winding and a thermal fuse, which significantly extends the life of the pump. The pump is equipped with a collapsible hose mandrel, which allows the connection of several types of hoses of different diameters. The pump is capable of extracting water to a very low residual level (approx. 3 mm).
Submersible Pump MTF WPE055
It is a subtle model of a pump for clean and useful water without admixture of solid particles. The main advantage of this model is the integrated float, which guarantees automatic operation even in a very narrow space, as the pump has dimensions of only 19x15 cm, so it is perfectly suited for draining drainage pits, etc.
Another great advantage of this pump is the very low residual level of pumped water (approx. 10 mm). A copper-wound motor and a thermal fuse to prevent overheating guarantee a long service life.