Cable connection box, distribution box PROFI
24,20 €
The cable junction box is mounted above the waterline in fully in-ground swimming pools and is connected to the underwater spotlight installed in the pool via a cable protection conduit (not included in the scope of delivery). The cable from the spotlight can then be extended as needed within the junction box using terminal blocks to route it to the low-voltage safety transformer.
Related products
Built-in wide-mouth skimmer 17.5 Slim for high water levels
Slim wide-mouth skimmer for installation in masonry or solid pools. The skimmer is made of pressure- and impact-resistant, high-quality ABS plastic. All parts are UV-stabilized in areas that are not buried. The skimmer comes complete with skimmer basket, skimmer flap, gaskets, liner flange, cover plate, and screws. The skimmer has two connection options: 1" or 1/2" internal threads. Please note that this skimmer is intended for use exclusively in...
PREMIUM underlay fleece, pack III 28m², quality 500 g/m²
Very strong, thermally and mechanically bonded, rot-proof underlay fleece for protecting the pool liner from PVC-incompatible materials, min. 500 g/m². Recommended for the following swimming pools from our range: Round pool 5.00 m, Oval pool 5.70 x 3.00 m, Oval pool 6.00 x 3.20 m, Oval pool 7.00 x 3.50 m, Oval pool 5.50 x 3.70 m, Oval pool 6.10 x 3.75 m, Figure-eight pool 6.25 x 3.60 m. The fleece is supplied in rolls 2 m wide and 14 m long. Due to manufacturing and packaging technology...
PS30 rectangular pool PS 8.00 x 4.00 x 1.50 m 4D film 0.9 …
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Single steel-walled figure-eight pool PS HQ 6.25 x 3.60 x 1…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 25.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
Single steel-walled round pool PS HQ 3.00 x 1.20 m with A…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 7.5 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or other factors.
SPECK pool pump POOLSANA ProPump 11
Self-priming, reliable, and exceptionally quiet SPECK brand pool pump. For over 100 years, the name SPECK has stood for quality filter pumps made in Germany like no other. The SPECK ProPump is a monobloc pump with an integrated strainer. A bellows mechanical seal is mounted on the plastic impeller hub. The motor/pump shaft does not come into contact with the circulating water, thus ensuring separation of live and water-carrying components.
Steel-walled figure-eight pool PS HQ 6.25 x 3.60 x 1.50 m with aluminum…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 28.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed either freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
Steel-walled round pool PS HQ 4.50 x 1.35 m, liner 0.8 mm sand …
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...