4D pool liner for round pools, 0.9 mm, green
851,84 €
Pool Liner Made in Germany: This pool liner is manufactured in Germany in compliance with the highest quality standards. The work is carried out by skilled professionals, some of whom have decades of experience. The innovative and completely new 4D pool liner gives your pool an unparalleled interior lining. 4D expands the surface properties of a conventional pool liner by adding two more dimensions at once…
Related products
Oval pool POOLSANA HQ 4.90 x 3.00 x 1.20 m with aluminum handrail…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 14 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Round pool Alu PS SQ 3.50 x 1.25 m Alu handrail 0.9 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 11 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required regardless of the pool size...
Round pool PS SQ 4.00 x 1.35 m, aluminum handrail, 4D liner 0,…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Sand filter system Pro Prime 500 Power SPECK ProPump 11
Heavy-duty and pressure-resistant filter tank Made in Germany. The sand filter tank with a diameter of 500 mm is made of polypropylene and impresses above all with its high-quality workmanship and high pressure resistance of up to 1.5 bar. In combination with the self-priming, plug-and-play pool pump, which has a circulation capacity of approximately 13 m³/h at 6 mWs, 690 watts, 230 V, the system is very well suited for swimming pools up to approximately 65 m³. Filling capacity...
Set of 1 PS PROFI pool spotlights with RGB LED bulb 30 W…
PAR56 Recessed Underwater Spotlight with RGB 30W LED Bulb. High-quality underwater spotlight made of impact- and pressure-resistant ABS for installation in straight pool walls, rectangular pools, and the straight sides of oval pools. The spotlight is equipped with a modern, energy-efficient RGB multicolor LED bulb with a 316LV4A stainless steel backplate, which produces a very bright light of up to 1,050 lm in mixed white with a maximum power consumption of 30 W. For oval pools or...
Single steel-walled round pool PS HQ 4.00 x 1.50 m Fol…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
SPECK pool pump POOLSANA ProPump 11
Self-priming, reliable, and exceptionally quiet SPECK brand pool pump. For over 100 years, the name SPECK has stood for quality filter pumps made in Germany like no other. The SPECK ProPump is a monobloc pump with an integrated strainer. A bellows mechanical seal is mounted on the plastic impeller hub. The motor/pump shaft does not come into contact with the circulating water, thus ensuring separation of live and water-carrying components.
Steel wall round pool POOLSANA PQ 3.50 x 1.20 m PURE set…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 10.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...