Pool solar cover PREMIUM 500 µ OXO Sapphire Blue for round pools
123,42 €
Pool Solar Cover Made in Germany. This pool solar cover is manufactured in Germany in accordance with the highest quality standards. The welding of the film panels and the cutting to the pool shape are done by hand with dedication and attention to detail. When you purchase this pool solar cover, you receive genuine handcrafted quality. The work is carried out by skilled professionals, some of whom have decades of experience. The renowned…
Related products
Aluminum wall oval pool PS HQ 7.00 x 3.50 x 1.50 m aluminum hand…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Round pool PS HQ 3.50 x 1.20 m, aluminum handrail, 0.8 mm liner …
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 10.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Round pool PS SQ 4.00 x 1.50 m, aluminum handrail, 4D liner 0,…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Round pool, aluminum PS HQ, 4.50 x 1.25 m, aluminum handrail 0.8 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 18 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required regardless of the pool size...
Single oval pool PS SQ 7.00 x 3.50 x 1.50 m aluminum…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Single steel-walled figure-eight pool POOLSANA HQ 5.25 x 3,…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 20 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one base plate, is installed.
Single steel-walled figure-eight pool PS HQ 6.25 x 3.60 x 1…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 22.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
SPECK pool pump POOLSANA ProPump 7
Self-priming, reliable, and exceptionally quiet SPECK brand pool pump. For over 100 years, the name SPECK has stood for quality filter pumps made in Germany like no other. The SPECK ProPump is a monobloc pump with an integrated strainer. A bellows mechanical seal is mounted on the plastic impeller hub. The motor/pump shaft does not come into contact with the circulating water, thus ensuring separation of live and water-carrying components.