Basin wall brush 45 cm PLUS
2,42 €
Extra wide pool wall brush 45 cm, incl. adapter for telescopic pole.
Related products
Aluminum wall round pool PS HQ with aluminum handrail 3.00 x 1.25 m PLU…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 8 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size.
Oval pool POOLSANA HQ 6.00 x 3.20 x 1.20 m with aluminum handrail…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 18.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
PREMIUM PE pool cover for oval and figure-eight pools
Pool covers protect pool water from natural contaminants and significantly reduce the frequency of pool cleaning. This particularly tear-resistant cover is made of coated PE woven fabric with eyelets and a tensioning rope with a ratchet. The pool cover prevents algae growth due to its opacity and is suitable for all seasons. The top side of the pool cover is blue, while the underside is coated black. The above size selection refers to...
PS30 rectangular pool POOLSANA SQ 5.00 x 3.00 x 1.50 m foil…
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 21.5 m³, number of insulating blocks: 85 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted.
Round pool PS HQ 3.00 x 1.20 m, aluminum handrail, 0.8mm liner…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 7.5 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or other factors.
Sand filter system POOLSANA Plus 300Pump 50
Heavy-duty and pressure-resistant filter tank Made in Germany. The sand filter tank with a diameter of 300 mm is made of polypropylene and is particularly impressive due to its high-quality workmanship and high pressure resistance of up to 1.5 bar. In combination with the self-priming, plug-and-play pool pump, which has a circulation capacity of approximately 4 m³/h at 6 mWs, 250 watts, 230 V, the system is very well suited for swimming pools up to approximately 25 m³. Filling capacity...
Single round pool PS HQ 5.00 x 1.25 m with aluminum wall…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 22.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Underlay fleece pack I 15 m², quality 300 g/m²
Very strong, thermally and mechanically bonded, rot-proof underlay fleece for protecting the pool liner from PVC-incompatible materials, min. 300 g/m². Recommended for the following swimming pools from our range: Round pools 3.00 m, Round pools 3.50 m, Round pools 3.60 m. The fleece is supplied in rolls 2 m wide and 7.5 m long. Due to manufacturing and packaging reasons, the fleece cannot always be supplied in one piece; a maximum of two sections will be provided.