Mini pool thermometer with floating head
0,00 €
Pool thermometer with floating head and fastening cord for your swimming pool. Measuring range from 0°C to +50°C or +30°F to +120°F. Length approx. 18.5 cm.
SKU:
251132
Category: New products
Description
Pool thermometer with floating head and fastening cord.
Additional information
| Weight | 0,1 kg |
|---|
Related products
50 mm piping set for floor drain
135,52 €
Complete 50 mm piping kit for connecting the floor drain to the suction line. Consisting of: 1 x roll of SpaFlex hose 50 mm (12 m), 1 x 1.5 m PVC pipe 50 mm, 1 x 2-way ball valve 50 mm, 2 x 90° elbows 50 mm, 1 x T-piece 50 mm, 1 x adapter 2" male thread x 50 mm, 2 x pipe clips, 1 x PVC cleaner, 1 x PVC adhesive, 1 x roll of Teflon tape
MTH Air Protect UNI blue rectangular pool cover with rope
636,46 €
For optimal pool protection in winter, choose the inflatable AIR PROTECT cover from MTH, designed for rectangular pools. Both the top and bottom surfaces are made of woven-reinforced PVC, each weighing 580 g/m². When inflated, this double-layered cover forms a uniform dome over the pool, providing excellent protection. Rainwater, dirt, and even snow are prevented from entering your pool. A valve inlet adapter (diameter...) is included.
Pool skimmer net, aluminum base with extra-fine mesh
14,52 €
This pool skimmer net is made of plastic with an aluminum-reinforced frame and a deep mesh for cleaning the bottom of your pool water. Additional features include the extra-fine mesh, which traps even the smallest particles, and the gold-colored handle. Dimensions: Net width 48.2 cm, net length 21.5 cm, net depth 46 cm, handle length 15.8 cm. A telescopic pole is required for operation and can be ordered separately under "Matching Accessories."
PVC combination handrail for figure-eight pools 6.25 x 3.60 m, color…
133,10 €
The combination handrail features a groove on the side for securing the liner and is suitable for both pool liners with a hanging bead and those with a wedge bead. In the first case, the bead welded to the liner is hooked over the steel wall, and then the handrail is attached. When replacing the liner, the old pool liner is cut along the handrail, and the new liner, which also has a wedge bead, is then installed using the handrail.
Rectangular pool 7.00 x 3.50 x 1.50 m PROFI set high level …
9,68 €
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 35 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Rectangular pool 8.00 x 4.00 x 1.50 m PROFI set Grey Bottom…
9,68 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round pool Alu PS SQ 4.00 x 1.25 m Alu handrail 0.9 mm …
2,42 €
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 14.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Steel wall round pool POOLSANA HQ 3.00 x 1.35 m PLUS set…
2 359,50 €
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 9 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
