MTH Air Protect Bicolor pool cover for rectangular pools…
675,18 €
For optimal pool protection in winter, choose the inflatable AIR PROTECT cover from MTH, designed for rectangular pools. Both the top and bottom surfaces are made of woven-reinforced PVC, each weighing 580 g/m². When inflated, this double-layered cover forms a uniform dome over the pool, providing excellent protection. Rainwater, dirt, and even snow are prevented from entering your pool. A valve inlet adapter (diameter…) is included.
Description
Inflatable winter cover made in Germany for your rectangular pool. Available in many sizes. Made of extremely tear-resistant, PVC-coated polyester tarpaulin on both sides, weighing 580 g/m² each. Bicolor design: one side blue, one side gray. Two inlet/outlet valves, one per side with a valve inlet adapter for connecting to a blower. Eyelets integrated around the edge, spaced approximately every 60 cm. Includes a robust, 6 mm thick elastic cord.
Additional information
| Weight | 26,5 kg |
|---|
Related products
POOLSANA UV-C disinfection device PROFI 75W stainless steel
The POOL SANA UV disinfection unit is integrated into the filter circuit between the sand filter system and the inlet nozzles. The physically cleaned water coming from the sand filter system is exposed to a high dose of short-wave UV-C radiation (253.7 nm) in the disinfection unit, which kills almost all bacteria, viruses, and even mold spores. This can reduce the need for water treatment chemicals by up to 80%. If the disinfection unit is in operation for at least 8-10 hours daily...
PROMO 4-step adjustable stainless steel pool ladder for freestanding use…
Very stable swimming pool ladder with ladder stiles made of highly polished V2A stainless steel with a stile diameter of 42 mm. The pool ladder has four non-slip plastic steps on each side and a central ladder platform and is suitable for above-ground pools up to 1.35 m deep. If the swimming pool is partially sunk into the ground, the ladder stiles located on the outside of the pool can easily be shortened accordingly with a hacksaw, potentially removing some steps. After...
PS30 rectangular pool PS 6.00 x 3.00 x 1.50 m 4D film 0.9 …
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 25 m³, number of insulating formwork blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Round pool PS HQ 3.50 x 1.20 m, aluminum handrail, 0.8 mm liner …
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 10.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Round pool PS SQ 4.00 x 1.35 m, aluminum handrail, 4D liner 0,…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Round pool, aluminum PS HQ, 4.00 x 1.50 m, aluminum handrail 0.8 mm …
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 17.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Steel-walled figure-eight pool PS HQ 6.25 x 3.60 x 1.35 m liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 25.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
Steel-walled figure-eight pool PS HQ 6.25 x 3.60 x 1.50 m liner…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 28.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed either freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...