Pool built-in skimmer POOLSANA PLUS with flange cover
36,30 €
The skimmer, also called a surface skimmer, is a built-in swimming pool component that connects to the sand filter system or pool pump and draws water from the pool’s surface. Our built-in skimmer PLUS is ideal for steel-walled pools, above-ground pools of all types, including round, figure-eight, and oval pools, and is very easy to install. The skimmer is made of impact- and pressure-resistant ABS plastic and has a 1 ½” female threaded connection. A 1 ½” male threaded fitting x 3238…
Description
The classic built-in skimmer with a 1/12″ female thread connection is ideal for steel-walled pools. Delivery includes a liner flange with double-walled flange gasket, flange cover, stainless steel locking and flange screws, suction plate with a 3238 mm diameter connection, a 1/12″ male thread x 3238 mm hose barb, a roll of Teflon tape for sealing, a skimmer flap, a strainer basket, and a skimmer lid.
Additional information
| Weight | 2 kg |
|---|
Related products
Pool cover MTH Air Protect UNI blue oval-eight shape …
For optimal pool protection in winter, choose the AIR PROTECT inflatable cover from MTH, designed for oval and figure-eight pools. Both the top and bottom surfaces are made of woven-reinforced PVC, each weighing 580 g/m². When inflated, this double-layered cover forms a uniform dome over the pool, providing optimal protection. Rainwater, dirt, and even snow are prevented from entering your pool. A valve inlet adapter is included...
Protective fleece for rectangular pool, white
Non-rotting, fungicide-treated underlay fleece to protect the pool liner from PVC-incompatible materials. The fleece is supplied in rolls 1.50 m wide. It is spot-fixed to the pool walls using spray adhesive. Matching products are available. Scope of delivery: Rectangular pool 6.00 x 3.00 x 1.50 m: 30 linear meters at 1.50 m roll width, 45 m²; Rectangular pool 7.00 x 3.50 x 1.50 m: 40 linear meters at 1.50 m roll width, 60 m²; Rectangular pool 8.00 x 4.00 x 1.50 m: 5...
PS PREMIUM 500 sand filter system with Speck PS SuperP pump…
Maximum convenience thanks to the two-part tank design. The centrally divided design makes filling and changing the sand particularly easy, making the system ideal for installation in confined spaces such as basements or filter shafts. The two tank halves are connected by a stainless steel clamping ring, which is finished with a visually appealing black protective coating. The tank is made of GRP (glass-reinforced plastic)...
Round pool Alu PS SQ 3.50 x 1.25 m Alu handrail 0.9 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 11 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required regardless of the pool size...
Round pool Alu PS SQ 5.00 x 1.25 m Alu handrail 1.0 mm …
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 22.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Single oval pool PS SQ 5.25 x 3.20 x 1.50 m aluminum…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Single pool, steel wall round pool POOLSANA HQ 3.50 x 1.35 m…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 12 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Steel-walled figure-eight pool PS HQ 6.25 x 3.60 x 1.20 m with aluminum…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 22.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...