Rectangular pool 8.00 x 4.00 x 1.50 m PLUS set sand under... - Image 1
Click to enlarge
Home » Shop » Rectangular pool 8.00 x 4.00 x 1.50 m PLUS set sand under…

Rectangular pool 8.00 x 4.00 x 1.50 m PLUS set sand under…

9,68 €

Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.

SKU: 106153 Category:
Description

POOL SANA rectangular pool consisting of PS30 insulating shell elements + a precisely fitting, sand-colored PVC pool liner (approx. 0.8 mm) with wedge bead + aluminum hanging profiles. The PLUS set includes a rot-proof protective fleece + spray adhesive, a wide-mouth built-in skimmer and two inlet nozzles with wall penetrations, a POOL SANA Pro 500 AQUA Plus 11 sand filter system (Made in Germany) including filter sand, a PROFI Ø 50 mm earth-resistant piping set, a 4-step Comfort corner under-pool ladder (118 x 118 cm), and a 6-piece cleaning kit…

Related products

Handpad

0,00 €
The pool hand pad is ideal for cleaning your swimming pool, with a handle and strong polyester fleece.
Add to cart

Oval pool PS SQ 6.00 x 3.20 x 1.50 m aluminum handrail 4D-F…

4,84 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 23.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Add to cart

PS30 rectangular pool POOLSANA HQ 8.00 x 4.00 x 1.50 m foil…

4,84 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 45 m³, number of insulating blocks: 125 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Add to cart

Rectangular pool 6.00 x 3.00 x 1.50 m PROFI set Sand Bottom…

7,26 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 25 m³, number of insulating formwork blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
Add to cart

Round pool Alu PS SQ 5.00 x 1.50 m Alu handrail 0.9 mm …

4,84 €
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 27.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Add to cart

Round pool PS SQ 4.00 x 1.35 m, aluminum handrail, 4D liner 0,…

2,42 €
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Add to cart

Single steel-walled round pool PS SQ 3.50 x 1.35 m with A…

2 052,16 €
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 12 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Add to cart