Sand filter system POOLSANA PREMIUM 400 with POOLSANA Pump 75
815,54 €
Maximum convenience thanks to the two-part tank design. The centrally divided design makes filling and changing the sand particularly easy, making the system ideal for installation in confined spaces such as basements or filter shafts. The two tank halves are connected by a stainless steel clamping ring, which is finished with a visually appealing black protective coating. The tank is made of GRP (glass-reinforced plastic)…
Description
ASTRALPOOL filter tank, divided in the middle, made of fiberglass-reinforced plastic, Ø 400 mm. Side-mounted 6-way backwash valve. Self-priming pool pump POOL SANA Pump SPS 75 with pre-filter, including attached power cable and plug. Filter capacity 7 m³/h at 450 watts, 230 V. TÜV and GS certified. Recommended for pools up to approx. 35 m³.
Additional information
| Weight | 15 kg |
|---|
Related products
Nano sponge POOLSANA MagicGomm
Nano sponges developed specifically for cleaning pool liners. The material dissolves during use, removing stains even without cleaning agents. The dirt is essentially erased from the liner. Contents: 2 x large sponges, 3 x small sponges. Product presentation video created by a long-time POOL SANA customer, YouTube channel TomTuT.
Oval pool PS SQ 7.00 x 3.50 x 1.50 m aluminum handrail 4D-F…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 30.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection...
POOLSANA filter glass 0.5 – 1.0 mm 20 kg
Filter glass for sand filter systems. Grain size 0.5 - 1.0 mm. Weight 20 kg. This filter material made from recycled glass is an excellent alternative to conventional filter sand. Its major advantage lies in the smooth surface of the filter glass, which prevents the formation of germs and biofilms within the filter, resulting in significantly improved filtration. This leads to shorter backwashing times, longer replacement intervals (3-4 years), and reduced consumption of water treatment chemicals. For filter containers...
PoolSANA InverPOWER ULTRA 12 Full Inverter Heat Pump
1. Ultra-high energy efficiency. The name says it all. Thanks to full inverter technology combined with sophisticated design and control, our InverPOWER ULTRA heat pumps have a particularly high COP (coefficient of performance) of over 18, setting completely new standards in efficiency, as their heating output is many times higher than the power they draw from the grid. But the exterior is also impressive. The casing of the InverP...
PROMO 4-step adjustable stainless steel pool ladder for freestanding use…
Very stable swimming pool ladder with ladder stiles made of highly polished V2A stainless steel with a stile diameter of 42 mm. The pool ladder has four non-slip plastic steps on each side and a central ladder platform and is suitable for above-ground pools up to 1.35 m deep. If the swimming pool is partially sunk into the ground, the ladder stiles located on the outside of the pool can easily be shortened accordingly with a hacksaw, potentially removing some steps. After...
PS30 rectangular pool POOLSANA HQ 6.00 x 3.00 x 1.50 m foil…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 25 m³, number of insulating formwork blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the reinforcement may need to be adjusted.
PS3080 rectangular pool POOLSANA HQ 6.00 x 3.00 x 1.50 m…
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 25.5 m³, number of insulating blocks: 95 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted.
Single steel-walled figure-eight pool POOLSANA HQ 6.25 x 3,…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 22.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...