Steel wall oval pool POOLSANA HQ 4.90 x 3.00 x 1.20 m PROFI…
2,42 €
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 14 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing steel, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the…
Description
Steel-walled oval pool POOL SANA HQ – Made in Germany – consisting of a 0.6 mm thick, hot-dip galvanized steel wall + a precisely fitting, blue 0.8 mm PVC pool liner with a hanging bead + a combination special handrail and base rails made of gray plastic. As a professional set, it includes a POOL SANA UV-C disinfection unit (75 W) which significantly reduces water maintenance requirements, a 500 g/m² underlay fleece, a built-in skimmer and two inlet nozzles, and a POOL SANA PRO PRIME 400 SPECK PP 7 sand filter system (Made in Germany) including filter sand.
Additional information
| Weight | 268,5 kg |
|---|
Related products
Aluminum wall oval pool PS HQ 6.00 x 3.20 x 1.50 m aluminum handrail…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 23.5 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the...
Aluminum wall oval pool PS HQ 8.00 x 4.00 x 1.50 m aluminum hand…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 40 m³. General information on aluminum-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After installation, the ends of the oval pool are backfilled with lean concrete. For disinfection of the pool...
Pool pump POOLSANA Pump 75
Self-priming, reliable pool pump. The POOLSANA Pump 75 impresses above all with its compact design and very high reliability. This TÜV and GS-certified, self-priming pool pump features a pre-filter basket, a drain unit, and comes pre-equipped with a power cable and plug. The pump has a circulation capacity of 6 m³/h at 6 mWS and is ideally suited for swimming pools up to approximately 25 m³ water capacity or for filter tanks with a capacity of...
PREMIUM underlay fleece, pack III 28m², quality 500 g/m²
Very strong, thermally and mechanically bonded, rot-proof underlay fleece for protecting the pool liner from PVC-incompatible materials, min. 500 g/m². Recommended for the following swimming pools from our range: Round pool 5.00 m, Oval pool 5.70 x 3.00 m, Oval pool 6.00 x 3.20 m, Oval pool 7.00 x 3.50 m, Oval pool 5.50 x 3.70 m, Oval pool 6.10 x 3.75 m, Figure-eight pool 6.25 x 3.60 m. The fleece is supplied in rolls 2 m wide and 14 m long. Due to manufacturing and packaging technology...
PS30 rectangular pool POOLSANA 7.00 x 3.50 x 1.50 m 4D foil…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 34.5 m³, number of insulating blocks: 110 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted...
Round pool PS SQ 4.50 x 1.50m, aluminum handrail, 4D foil 0.9…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 22 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Single round pool PS SQ 4.00 x 1.25 m with aluminum wall…
Pool depth 125 cm, water depth approx. 110-115 cm, capacity approx. 14.5 m³. General information on aluminum-walled round pools: All round pools (1.20 m, 1.25 m, and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, a concrete base slab is required – regardless of the pool size…
Steel wall round pool POOLSANA HQ 4.50 x 1.20 m PLUS set…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 17.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...