Underlay fleece PREMIUM Pack I 15 m², quality 500 g/m²
58,08 €
Very strong, thermally and mechanically bonded, rot-proof underlay fleece for protecting the pool liner from PVC-incompatible materials, min. 500 g/m². Recommended for the following swimming pools from our range: Round pools 3.00 m, Round pools 3.50 m, Round pools 3.60 m. The fleece is supplied in rolls 2 m wide and 7.5 m long. Due to manufacturing and packaging reasons, the fleece cannot always be supplied in one piece; a maximum of two sections will be provided.
Related products
Pool liner 0.8 mm for figure-eight pools, blue
Pool Liner Made in Germany: This pool liner is manufactured in Germany in compliance with the highest quality standards. From the production of the raw material into liner sheets to the finishing and welding together to create a complete pool lining, this pool liner guarantees you exclusively quality Made in Germany. The work is carried out by skilled professionals, some of whom have decades of experience. As a testament to our own conviction...
PS30 rectangular pool POOLSANA 5.00 x 3.00 x 1.50 m 4D foil…
Pool depth 150 cm, water depth approx. 142-144 cm, capacity approx. 21.5 m³, number of insulating blocks: 85 pieces, each 100 x 25 x 30 cm (L x W x H), including end caps for the corners. General information on polystyrene rectangular pools: The hollow insulating blocks must be installed bonded to a reinforced concrete slab, reinforced with rebar, and filled with concrete. The rectangular pool is primarily designed for complete in-ground installation. For partial in-ground installation, the type of reinforcement may need to be adjusted.
Round pool PS HQ 3.00 x 1.50 m, aluminum handrail, 0.8mm liner…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 10 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or...
Round pool PS SQ 4.00 x 1.35 m, aluminum handrail, 1.0 mm liner…
Pool depth 135 cm, water depth approx. 120-125 cm, capacity approx. 15.5 m³. General information on steel-walled round pools: All round pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size – and...
Single oval pool PS SQ 5.25 x 3.20 x 1.50 m aluminum…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 20.5 m³. General information on steel-walled oval pools: The oval pools are not freestanding and must be installed to a depth of at least 23 cm of their total height. A concrete base slab and retaining walls along the long sides, which must be connected to the base slab with reinforcing mesh, are required on-site. After assembly, the ends of the oval pool are backfilled with lean concrete. For disinfection...
Single steel-walled figure-eight pool POOLSANA HQ 5.25 x 3,…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 17.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed either freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...
Steel wall round pool POOLSANA PQ 3.00 x 1.20 m PURE set F…
Pool depth 120 cm, water depth approx. 105-110 cm, capacity approx. 7.5 m³. General information on steel-walled round pools: All round pools 1.20 m and 1.35 m can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. Please note that the in-ground area of the swimming pool must always be backfilled with lean concrete. Furthermore, the construction of a concrete base slab is required – regardless of the pool size or other factors.
Steel-walled figure-eight pool PS HQ 5.25 x 3.20 x 1.50 m liner…
Pool depth 150 cm, water depth approx. 135-140 cm, capacity approx. 22.5 m³. General information on steel-walled figure-eight pools: All figure-eight pools (1.20 m and 1.35 m) can be installed freestanding or partially or fully in-ground. For the 1.50 m pool, however, partial in-ground installation of at least 50 cm is mandatory. A base slab is required for all figure-eight pools, into which the included steel support structure, consisting of two side supports and one...